Dent Removal Training Course Details

We offer comprehensive training courses that teach you everything you need to know about paintless dent repair and once completed you will have the knowledge to further your career and become a PDR technician.

Course Options

OPTION 1 - ONE WEEK

Incorporate PDR into your business or for those who have a full time job and wish to make a steady transition where time of work is an issue we recommend the one week course (all details are below with pictures of what is achieve for every trainee on the course).

OPTION 2 - TWO WEEKS

We recommend two weeks for the perfect start to a PDR career this will be the week one course a bit more in depth and more time spent on each process and each tool. The second week we will apply all the techniques and tool used to implement real life conditions dent removal not easy open access dents. We will cover various restricted areas of door, working on the sound deadening pads, swage lines and general dent removal open access. We will also work on bonnets, tailgates, rear wings, front wings, and roof panels also front and rear doors some with the door stripped out.

OPTION 3 - SIX WEEKS

THIS WILL INCLUDE FREE TRAINING AFTER THIS POINT IF REQUIRED

With this option is Pure dents will work with you until you are fixing dents for a career this is the quickest option to get started as a PDR technician and we have a good success rate with trainees to technician. There are also options to become a Pure dent removal PDR technician in your area where we help you advertise as well as us advertising the brand name in your area to get you started. (Not a franchise) Please speak to one of the team for details on this option.



Run from our Portsmouth PDR training centre with just 3 attendees per course all taught by a highly experienced instructor.

In this unique & comprehensive, highly detailed course, you’ll gain a deep understanding of these 13 essential areas of paintless dent repair:
Tool Selection & Location

#1 Tool Selection & Location

We start off this course with Tool selection how best to hold and anchor points also tip locating techniques. You will be given a demonstration on how to locate the tool tip on the panel.

Light Set Up

#2 PDR Light
Set Up

Set up of PDR light, demonstration of various reflective boards and lights.

Various Tools for Open Access

#3 Various Tools for Open Access

Various PDR Rods and tips for open access dent removal

REMOVAL OF SHALLOW AND SHARP DENTS (small)

#4 REMOVAL OF SHALLOW & SHARP DENTS (small)

The trainee will be taught to remove shallow and sharp dents to the size of a 5-10 pence piece open access.

Book Now!

Book Online

You can book and pay for your course using the "Book Now" button. Once clicked, select the best date for you and either pay in full or you can pay a £100 deposit and the remaining amount will be due the day your course starts.

If you have any questions or would like to know more information, please do not hesitate to get in touch. We hope to see you very soon!

PDR HAMMER AND KNOCK DOWNS

#5 PDR HAMMER & KNOCK DOWNS

Techniques for knock downs when removing high points and ridges.

GOLF BALL SIZE DENT REMOVAL

#6 GOLF BALL SIZE DENT REMOVAL

Removal of golf ball size dents and creases in (open access).

Restricted Access Dents

#7 Restricted Access Various Tools

Restricted access dent removal with whaletails and 6 piece brace tool set. Working in and around framework or double skinned areas with selected tools.

BODY COUNTOUR/SWAGE LINE DENTS

#8 BODY COUNTOUR/SWAGE LINE DENTS

Removal of dents on swage lines & body contours. We teach you the specific technique to remove dents on body contours/swage lines to perfection.

Book Now!

Book Online

You can book and pay for your course using the "Book Now" button. Once clicked, select the best date for you and either pay in full or you can pay a £100 deposit and the remaining amount will be due the day your course starts.

If you have any questions or would like to know more information, please do not hesitate to get in touch. We hope to see you very soon!

Stone Chip Dents

#9 STONE CHIP
DENTS

Removal of stone chip dents this is very common and is to simulate real life situations very often a customer will have a dent removed and touch up the stone chip.

LARGE IRREGULAR CREASE DENTS

#10 LARGE IRREGULAR CREASE DENTS

These dents are caused by something like a bike handle dragging across a panel something falling in a customer’s garage onto a panel or dragged along a panel (not a straight line crease).

Door Repairs

#11 DENTS ON VARIOUS AREAS OF A DOOR

Working on various areas using various tools on doors. Not every part of a door is the same and not every make of car door is the same. We teach on various panel strengths and makes, to gain an overall realistic experience.

WORKING ON A MOTOR VEHICLE

#12 WORKING ON A MOTOR VEHICLE

At the end of the week we work on a vehicle in the training centre specifically for the training. There is also a chance to work on a live customer vehicle like in the picture or take dents out of your own vehicle.

GLUE LIFTING DENT REMOVAL

#13 GLUE LIFTING DENT REMOVAL

Glue pulling using mini lifters, slide hammers and various glue tabs. The instructor will demonstrate and a few tricks of the trade. Then you will be able to have a little time hands on to practice the procedures.

PDR Course Completion

Course Completion

ON COMPLETION OF THE PURE DENT REMOVAL COURSE YOU WILL RECEIVE A CERTIFICATE

You can book and pay for your course using the "Book Now" button. Once clicked, select the best date for you and either pay in full or you can pay a £100 deposit and the remaining amount will be due the day your course starts.

Paul Paul
Paul Trainee

I attended a taster course first and Rob gave me a great insight to the world of PDR, he was informative and left me with a bug to attend a weeks course.

On the full course Rob gave me a lot of information and gave good instructions and answered any questions I asked in depth.

Overall a great week, learned a lot had plenty of practical hands on experience and left me wanting to complete other training needed to progress quicker and qualified. Rob’s overall teaching methods are very good and handles different learning speeds between different students very well. Rob explained all techniques fully and gave me plenty of time to adjust leaving me to it too perfect.

Thank you Rob

Very well run course, structured and professional with good facilities. I was picked up and dropped off at the hovercraft every day which was much appreciated.... See more >

After booking the course I received all the information needed over the phone and also received emails and about tools required.

I came from Ireland on a... See more >

I had been wanting to add another part to my car valeting business, and PDR is something i’ve been thinking of doing for a while. When I phoned and spoke... See more >

On The course there was a great atmosphere within the group, clean, bright and spacious premises. Rob needed educating in tea making but got the idea by the end... See more >